***Please Note***
Attention US Citizens: Shipping has resumed. However, due to U.S. Section 232, all steel products—including knives and pruning shears—are now subject to a 50% customs duty. The rate has increased from 15% to 50%. A carrier commission (approx. $18+) also applies. These charges are the recipient's responsibility.
Attention Canadian citizens: We have resumed shipping!
Attention UK Citizens: We have resumed shipping, but it's not cheap. We cannot ship if the total amount excluding shipping is less than 135 pounds. A commission fee will be added in addition to customs duty.
Attention EU Citizens: We cannot ship if the total amount excluding shipping is less than 150 euros. A commission fee will be added in addition to your country's customs duty.
For all other countries: If your country charges VAT (Value Added Tax), a commission fee will be added in addition to that amount.
In case of cancellation, we will refund the amount we received from PayPal, which is the total amount you paid minus the PayPal fee at the time of receipt.
All Products
-
[KONDO] Stone cutting chip (small size) [KMF130101]
1,100JPY (not include VAT & TAX)
Not available
A place to divide a stone into first is trenched by a diamond cutter. Then, a stone can be broken by…
-
[KONDO] 3 Stone cutting chips (small size) [KMF130102]
3,080JPY (not include VAT & TAX)
Not available
A place to divide a stone into first is trenched by a diamond cutter. Then, a stone can be broken by…
-
Bamboo Hatchet 105mm [AJG020101]
11,000JPY (not include VAT & TAX)
Not available
Bamboo hatchet is not a cutting tool for bamboo. It's a hatchet for dividing the bamboo longitudinal…
-
Bamboo Hatchet 180mm [AJG020103]
12,100JPY (not include VAT & TAX)
Stock:3
Bamboo hatchet is not a cutting tool for bamboo. It's a hatchet for dividing the bamboo longitudinal…
-
Haba Tori knives (1pair) [KNT120101]
17,600JPY (not include VAT & TAX)
Low stock
This is an order item. We need a period of about several weeks to manufacture after ordering. By pl…
-
Leather knife width 28mm (1.10inch) Right hand [MTN050101]
4,290JPY (not include VAT & TAX)
Low stock
Leather Knife suitable for fine leather cutting work. The blade is made of carbon steel and is deepl…
-
Leather knife width 28mm (1.10inch) Left hand [MTN050102]
5,060JPY (not include VAT & TAX)
Not available
* This product is for left-handers.Leather Knife suitable for fine leather cutting work. The b…
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Double edge) [KNT040101]
22,000JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument A maximum of 14 days is required to ship. This…
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Single edge) [KNT040301]
23,100JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument. A maximum of 14 days is required to ship. Thi…
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Single edge, Left handed) [KNT040302]
25,300JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument. A maximum of 14 days is required to ship. Thi…
-
[KANETAKA] Reeds Shaving tool (White Paper steel, double edge) [KNT040102]
19,800JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument A maximum of 14 days is required to ship. This…
-
[KANETAKA] Pencil sharpener for drawing (righthand, White Paper steel, Black finish) [KNT030101]
11,000JPY (not include VAT & TAX)
Not available
Pencil sharpener for drawing (righthand, White Paper steel, Black finish)
-
[KANETAKA] Pencil sharpener for drawing (lefthand, White Paper steel, Black finish) [KNT030102]
13,200JPY (not include VAT & TAX)
Not available
Pencil sharpener for drawing (lefthand, White Paper steel, Black finish)
-
[KANETAKA] Cutting knife (righthand, White Paper steel, Torsion design) [KNT090102]
6,600JPY (not include VAT & TAX)
Not available
Cutting knife (righthand, White Paper steel, Torsion design)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 6mm) [KNT070101]
9,900JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 6mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 7.5mm) [KNT070102]
11,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 7.5mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 9mm) [KNT070103]
13,200JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 9mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 6mm+7.5mm+9mm) [KNT070104]
33,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 6mm+7.5mm+9mm)
-
[KANETAKA] Japanese Razor (Large, Blue Paper steel, 57mm edge) [KNT020201]
33,000JPY (not include VAT & TAX)
Not available
57mm edge is the large size for a common Japanese. However, for persons with the large physique, suc…
-
[KANETAKA] Japanese Razor (2chogake, White Paper steel, 50mm edge) [KNT020203]
26,400JPY (not include VAT & TAX)
Stock:3
50-mm edge is a little big size for a common Japanese. This size is called 2chogake in Japan. The pr…
-
[KANETAKA] Japanese Razor (1chogake, White Paper steel, 47mm edge) [KNT020202]
22,000JPY (not include VAT & TAX)
Not available
47mm edge is anormal size for a common Japanese. This size is called 1chogake in Japan. The professi…
-
[YSUHIRO] Ikenobo Shears (Full length 165mm) [OSM010101]
38,500JPY (not include VAT & TAX)
Not available
Mr. YOSHINOBU OSUMI follows the form of the father who got the expert's title, and how to build, and…
-
[KANETAKA] Ikenobo Pocket Shears (Full length 107mm) [KNT010203]
9,900JPY (not include VAT & TAX)
Low stock
Ikenobo Pocket Shears (Full length 107mm)
-
[KANETAKA] Ikenobo Shears (Full length 165mm, long edges) [KNT010202]
36,000JPY (not include VAT & TAX)
Low stock
Ikenobo Shears (Full length 165mm, long edges)
-
[KANETAKA] Ikenobo Shears (Full length 180mm, long edges) [KNT010201]
44,000JPY (not include VAT & TAX)
Low stock
Ikenobo Shears (Full length 180mm, long edges)
-
[NANIWA] Gouken Curved Water whetStone (#3000) [NNW010103]
1,700JPY (not include VAT & TAX)
Not available
Fine Whetstone (artificial, #3000), for pruning secateurs and all of curved edges. #3000 is fine fin…
-
[KANETAKA] NAKURA [KNT060102]
3,300JPY (not include VAT & TAX)
Low stock
NAKURA. Please use with Honzan whetstone.
-
[KANETAKA] Medium-rough Whetstone (artificial, #800, for small or medium edges) [KNT060201]
5,500JPY (not include VAT & TAX)
Stock:4
Medium-rough Whetstone (artificial, #800, for small or medium edges)
-
[KANETAKA] Medium-rough Whetstone (artificial, #800, for medium or large edges) [KNT060202]
13,200JPY (not include VAT & TAX)
Low stock
Medium-rough Whetstone (artificial, #800, for medium or large edges)
-
[KANETAKA] Fine Whetstone (artificial, #4000, for small or medium edges) [KNT060301]
5,500JPY (not include VAT & TAX)
Not available
Fine Whetstone (artificial, #4000, for small or medium edges)
-
[KANETAKA] Fine Whetstone (artificial, #4000, for medium or large edges, with a table) [KNT060302]
9,900JPY (not include VAT & TAX)
Low stock
Fine Whetstone (artificial, #4000, for medium or large edges, with a table)
-
[KUROBARA] Camellia Oil (100mm, bottle type) [KBR010101]
750JPY (not include VAT & TAX)
Not available
It is camellia oil protecting the blade from rust. It is contained in a 100 ml easy-to-use bottle. B…
-
Blacksmith's tong (The mouth of the Crow) [KNT920101]
16,500JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's tong. The shape of the tong has a similar to the mouth of the crow. …
-
Blacksmith's tong (Flat) [KNT920102]
15,400JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's tong. The shape of the tong has a flat. You can grip easily for flat…
-
[Tobisho] Pruners B-type 200mm (Red and Yellow taped handle) [TBS010401V]
9,020JPY (not include VAT & TAX)
Not available
This product was requested by Mr.Jose from Belgium. Features of B-type and Pruners B-type 200mm (…
-
[Tobisho] Optimized for cutting cardboard, Topiary shears 270mm (Double and Straight blade) [TBS010201x]
12,980JPY (not include VAT & TAX)
Not available
This item is requested by Mr. Alexander of Newtonville, NY. Features of Topiary shears 270mm (D…
-
[Tobisho] Snipping Pruners (Double-edged bud cutting with Gold stop, 200mm with black finish) [PS-27]
7,590JPY (not include VAT & TAX)
Not available
Product number: PS-27 Suitable for pruning delicate and densely leafed areas and for picking buds…