[KONDO] Stone Chipping Chisel (D=25mm Bits=9mm*12mm, roll) [KMF100103]
Our Selling Price: 7,500JPY (not include VAT & TAX)
It is a stone chisel for chipping. It is used at the masonry work, architecture and gardening. Stone Chipping Chisel of this size (Diameter=25mm Carbide bits=9mm*12mm / Brass brazing) becomes slightly large size also in lineup.
The main uses are chipping of a stone. It is used for the place which likes a coarse result. Since it respects the directions as it which people probably purchased are good and know, a detailed description is omitted. However, you should make the following point careful.
Please adjust an angle in Aoto of the GC whetstone 120H according to the stone to be used before beginning to use. When using it for soft stones, such as the Shirakawa stone and an Oya stone , it is about 60 degrees. In the case of granite, it is common to adjust to an obtuse angle rather than 55 degrees.
If you are a professional, the optimal SETTO for Angle picking Chisel of this size (Diameter=25mm Carbide bits=9mm*12mm / Brass brazing) is a 1.0 kg thing. However, when there is little experience, please use SETTO lighter than this.
The main use
For Art (Sculpture), Architecture, Landscape design, Garden, Repair the ruins ,etc.
It will be necessity about five business day to send.
About a maker, Kondo Masonry tools factory (AICHI pref)
The notes on use about Stone Chipping Chisel (D=25mm Bits=9mm*12mm, roll) [KONDO]
Please float Stone Chipping Chisel (Diameter=25mm Carbide bits=9mm*12mm, Brass brazing, roll), whenever you strike. If it continues striking, contacting, it will become a cause of a crack of carbide.
|Producing district||Okazaki, Japan [KONDO stonemason's tools factory]|
|Handedness||both (righthand & lefthand)|
|Full Length||187mm = 7.36inch|
|Bits size||9mm*12mm = 0.35 inch*0.47 inch|
|Handle diameter||25mm = 0.98 inch|
|Material||Tip : Carbide Handle : Steel & iron Junction : Brass brazing|
|Packing weight||About 750g|