[Kondo] Hex-Point Carbide-Tipped Chipping Chisel (Embedded) Body:19mm (0.75") Carbide Tip:9x12mm (0.35x0.47") [KMF100205]

Masterfully forged by [Kondo], this compact, light-weight hexagonal carbide-tipped chisel is built for meticulous stone cleaning, fine finishing, and close-quarters adjustment. It offers exceptional agility and low-fatigue performance, keeping your work highly steady and controlled when executing fine, repetitive hammer strikes to fit small structural stones in Dry Stone Walling (DSW), refine delicate rock interfaces in Japanese Gardens, or dress fine architectural stone elements.

This design firmly sets the carbide tip within a pre-drilled cavity in the steel shaft, filled with brazed brass, which effectively secures the tip and reduces detachment under continuous usage. It provides a highly direct impact response, giving you maximum tactical control over subtle surface details without risking component separation.

Please adjust an angle in Aoto of the GC whetstone 120H according to the stone to be used before beginning to use. When using it for soft stones, such as the Shirakawa stone and an Oya stone , it is about 60 degrees. In the case of granite, it is common to adjust to an obtuse angle rather than 55 degrees.

If you are a professional, the optimal SETTO for Angle picking Chisel of this size (Diameter=22mm Carbide bits=9mm*12mm / embed) is a 0.8kg thing. However, when there is little experience, please use SETTO lighter than this.

The main use
Stone chipping
For Art (Sculpture), Architecture, Landscape design, Garden, Repair the ruins ,etc.

It will be necessity about five business day to send.

About a maker, Kondo Masonry tools factory (AICHI pref)

This Stone Chipping Chisel (Diameter=22mm Carbide bits=9mm*12mm / embed) is made in Japan. It is product of Kondo stonemason's tools factory in Okazaki City, Aichi Pref known as a town of the stonemasons. This “Stone Chipping Chisel Diameter=22mm Carbide bits=9mm*12mm / embed” is a also blass brazing products. Yoji Kondo is the boss and the second of Kondo stonemason's tools factory, and he is an expert that has been worked for 50 years. He is known to Japanese craftsmen handling stones as one of stonemason's tools makers of carbide who are few in Japan now. His technique of brass brazing is highly valued because it is rare technique not only in the world but also in Japan.